Frequently Asked Questions

Any existing or possible interconnection between a drinking water system and any other system that contains a substance of unknown or uncertain quality is a cross connection. A cross connection also is described as the link that can bring 2 systems together.

The most common cross connection is an outside hose faucet, typically called a “hose bib” or “sillcock.” These plumbing fixtures are used for connecting hoses that we use for various purposes such as watering our gardens, flowers and lawns.

The methods, practices and procedures used to prevent contamination or pollution of drinking water from backflow through cross connections is called cross-connection control. It ensures that your drinking water remains safe from bacteria, chemicals and other substances that may enter the water from unknown or improperly maintained sources because of abnormal pressure changes.

It’s a written plan developed to detect, monitor and manage cross connections and implement the procedures and practices necessary to ensure safe drinking water and comply with the rules and regulations of federal, state and local governments.

The reverse flow of water or other substances in pipes, typically caused by unusual and irregular changes in pressure, is called backflow. Preventing backflow is a matter of avoiding the reverse flow of an unwanted substance into the drinking water by using special plumbing methods, devices and practices. Preventing backflow is accomplished through a physical means or mechanical device designed and built specifically to prevent backflow.

The backward flow of water or other substances from 1 system to another because of a decrease in pressure is called back-siphonage. The water or substance is drawn or siphoned backward to the point of lowest pressure, such as at a suddenly opened valve or hydrant, or at a break in a pipe or a water main.

The backward flow of water or other substances from one system to another because of an increase in pressure is called backpressure. The water or substance is pushed backward suddenly or over time by a pump, an increase in temperature or because of changes in height (pressure increases as water rises).

A physical means or mechanical device that has been tested and approved by a nationally recognized laboratory, organization or institute, such as Factory Mutual, Underwriters Laboratory, the Foundation for Cross Connection Control and Hydraulic Research, or the American Society of Sanitary Engineering.

It is the introduction or presence of any foreign substance in a drinking-water system that could or does make the water hazardous to human health.

It is the introduction or presence of any foreign substance in a drinking-water system that could or does change the taste, odor or color of the water and weakens its usefulness, but is not hazardous to human health.

Water that is fit for drinking, cooking and household uses is called potable water.

The most common cross connection is an outside hose faucet, typically called a “hose bib” or “sillcock.” These plumbing fixtures are used for connecting hoses that we use for various purposes such as watering our gardens, flowers and lawns.

Please visit our

Yes. All underground lawn and garden irrigation systems are required to have backflow prevention assemblies installed and routinely maintained. State law requires such assemblies to be tested at the time they are installed and yearly thereafter, as well as any time they are repaired or replaced.

A performance test is done to check if the assembly continues to operate as designed and continues to protect against backflow. A specialized test instrument equipped with a large pressure gauge is connected to the backflow prevention assembly with 3 separate high-pressure hoses that are attached in various techniques to measure the differences in pressure under certain conditions.

The test must be performed by someone who holds a current certification as a “backflow prevention device worker” issued by the Virginia Department of Professional and Occupational Regulation. The certification ensures you that the tester is specially trained, experienced, and has successfully completed an examination that tests his or her competency in the subject of cross connection control and backflow prevention.

Yes. At the time the test is conducted by the certified tester, he or she will complete a Backflow Prevention Assembly Test Report form, provide you with a copy, and either you or he must send Goochland County a copy of the form for the county’s records.

Use the link at the top of this page to download the BFP Test Report Form or contact the Goochland County Building Inspections Department.

Check advertisements in the yellow pages of your local telephone book listed under “Plumbing Contractors.” You can also search the internet.

There is no control over the cost of the test. Testers and businesses set their own prices, which are typically controlled by the current market. The owner (property owner, building owner, tenant or homeowner) is responsible for maintenance of the backflow prevention assembly at his or her own expense.

Please use the links at the top right of this page for more detailed information, including the types of problems that can and have been caused by cross connections and backflow, the principles of water pressure and backflow, and additional examples of assemblies and devices.